Pest Control Sprayer

WHAT A PEST CONTROL SPRAYER CAN DO FOR YOU

A pest control sprayer is necessary whenever treatments are required to control harmful insects (for example mosquitoes, grasshoppers, flies, gnats etc.), both flying and in the larval state. Similarly it is used for sanitizing interventions in large areas, buildings, warehouses, composting centres, waste deposits etc. or moreover for the protection of ornamental plants (public and private green). For example, the distribution of Bacillus thuringiensis for the control of the processionary moth of oaks, pines, etc.

Martignani electrostatic pest control sprayer technology is ideal for all around types of pests and can cover all your needs with a single, very versatile machine. It allows you to: carry out all types of phytosanitary interventions, starting from 0, 5, 10 up to 50 gallon/hour but also reaching much higher volumes; moreover, it allows you to spray herbicides or spray your ornamental plants; reach an extraordinary autonomy even with tanks of only 80 or 100 gallons maximum; carry out a targeted distribution, without losses due to drift or run-off; effectively distribute different types of products, as powders in aqueous suspension, even very concentrated ones, and liquids dissolved in water or even pure; obtain huge savings of water, pesticides, and labour time; make a very homogeneous distribution that makes sprayed products even more effective; avoid killing bees and other beneficial insects.
 

WHAT SPRAYER SHOULD I CHOOSE?

Firstly, you should choose between backpack and skid sprayers. The choice depends on the overall treated surface area and the type of spraying that you wish to perform. Backpack sprayers are used for smaller surfaces and their autonomy is limited. While skid sprayers are suitable for large surface areas. Later, you can personalize the product in order to better accomplish your goal. If your purpose is ground sterilization, you can choose either conventional systems (using chemical products) or organic systems (using microbiological products). In both cases every Martignani pest control sprayer uses less chemical products and create less drift with better coverage.

Conventional pest control sprayer: less chemicals needed less drift better coverage by using less water. In other words, in the conventional case: you use less product, less drift, better coverage with less water. In contrats, organic pest control sprayer: no microbiological damage with high pressures (22 psi only) large-passage nozzles (0.15”). For perimeter pest control Martignani offers its models of Phantom Super Ecology series, it has an autonomous engine mountable on pick-up vehicles, trailers or towed platforms. Versions for tractor PTO are also available. You can spray Roundup herbicide using the anti-drift bell hand gun. In conclusion, this accessory can equip, upon request, all Martignani pest control sprayers.

RECOMMENDATIONS FOR USE MARTIGNANI PEST CONTROL SPRAYERS

In this paragraph, we're going to talk abouth user and Parts Manuals. Which are supplied with the machine, as the Operating and Maintenance Manual. Firstly, carefully read the manuals, observe the safety posters, and utilize suitable personal operator protective equipment where required. It is always preferable to wash the main tank before applying another type of chemical or before changing chemical, as when you have to use an innocuous product after an herbicide. Therefore we recommend to follow the instructions on the manual about the washing process. However, for this purpose, customer may request three individual separate chemical tanks. 

8 GOOD REASONS FOR CHOOSING MARTIGNANI PEST CONTROL SPRAYER  

THE EXCLUSIVE ADVANTAGES OF THE MARTIGNANI SYSTEM, APPRECIATED BY EXPERTS AND PROFESSIONAL USERS IN THE ENVIRONMENTAL HYGIENE AND PUBLIC GROUND CARE SPHERE

The perfect and uniform micronization produced using a unique type of pneumatic nozzle, with a large diameter (4 mm), and fade-free functionality, no wear, no clogging, no maintenance. Precision liquid metering unit with graduated stainless steel scale for instantaneous metering of any volume to be distributed, from 50 to 1600 l/hour at a single pressure of 1.5 bar. The best and most congenial system, which can also be used in conjunction with the “I.M.E.” micro-pump to meter pure chemicals, featuring separate reservoirs (also controlled in l/hour but at 10 bar instead of the 1,5 bar of the sprayer circuit. In essence this means no risk of damages and the elimination of the delicate back-pressure valve).

High performance centrifugal fans, with an exclusive design, able to provide a coverage with several hundreds of microscopic droplets per cmq at even very low volumes (50 l/hour) and up to distances that are impossible to achieve with any air conveyance sprayer with high pressure nozzles and calibrated plates.

Device for Electrostatic charging of micro droplets (patent BO91C0001444 and BO93A000444), the first produced in Europe (1981) and the only one multi-tested in Italy by three research institutes with published phytotherapeutic results. Now it is widespread and well-known throughout the world as Number 1 when it comes to innovative methods concerning the application of plant protection products with respect for the environment and operators’ health.
POWER AIR FOGGER KIT (patent BO92U000163), used in conjunction with the fluid dynamic action of the Martignani fans to deliver an ultra-powerful, no drifting screen of mist. It can also be used with very lightweight moplen pipes.

ULV NOZZLE KIT (ULTRA LOW VOLUME) - PATENT N° BO2006A000457

The “U.L.V.” KIT to distribute products at Ultra Low Volume is ideal to protect from stray adult insects, to combact locust emergencies in deserts and to eliminate odours in composting areas, dumps, etc. It consists of a mist-blowing nozzle on the central axis of the spray gun’s exit port and it simply works thanks to the air pressure blowing from the spraying head (therefore without using an air compressor).

Spray Gun with PLUG ‘N PLAY System in order to combine different types of spray heads:
   - Round classic head (Long-range treatment)
   - Fan head (wide-angle treatment with reduced range on shrubs, hedges, little masts, etc..)
   - Double head (bilateral treatment)

REMOTE CONTROL WITHOUT WIRING

A mist blowing unit that requires practically no maintenance.

1. Precision METERING UNIT
2. Omni-directional SPRAY GUN with 90° + 360° rotation
3. BLOWER with electrical rotation through 260°
4. Quickly TRANSPORTED FRAME with fork guide
5. “Long Life” professional CONTROLS
6. FUEL TANK (25 lt)
7. 300L TANK with hand-washing (10 lt) and circuit flushing (25 lt)
8. Clearly visible (from both sides) LEVEL GAUGE
9. Double FILLING PORT
10. Exclusive MUFFLER in Stainless Steel
11. HOSE REEL ROLLER with manual or electric operation or automatic with spring (40, 50, 100 m hose capacity)

TECHNICAL DETAILS

Martignani offers a remarkably high technology standard and a wide range of choice to personalize your sprayers. Depending on the type of job or spraying technique you want to carry out: tank capacities starting from 25 up to 106 gallons; we offer three individual separate chemical tanks (1,3 gal each) upon request cannon head with 3 movements/rotations for the most flexible spraying directions calibration simple, accurate, reliable over time without the need for complicated electronic systems electrostatic charge that uses low and ultra-low volumes of water self-propelled pneumatic technology, you can choose between 52hp and 26hp diesel engine (recommended if you need high rpm when spraying) or 16hp gasoline different length of hose available with the spray gun (165 or 328 feet) with electric or mechanical winding wide range of specific spray nozzle for the backpack sprayers